Product Index 
Call our Sales Team
01903 538 488
Mon - Fri 8am - 6pm
My Account
GBPLogin0 Items
Product Index 
Call our Sales Team
01903 538 488
Mon - Fri 8am - 6pm
My Account
GBPLogin0 Items
Call our Sales Team
01903 538 488
Mon - Fri 8am - 6pm
My Account
GBPLogin0 Items
01903 538 488
My Account
MENU

Pigeon Post and Wire Kits For Surface Mounting

Pigeon Post and Wire Kits For Surface MountingPigeon Post and Wire Kits For Surface MountingPigeon Post and Wire Kits For Surface MountingPigeon Post and Wire Kits For Surface Mounting
PW261 - 15m Pigeon Post and Wire Kit For Surface Mounting
77.27 Each inc. vat
64.39 ex. vat
PW262 - 30m Pigeon Post and Wire Kit For Surface Mounting
102.44 Each inc. vat
85.37 ex. vat
PW263 - 60m Pigeon Post and Wire Kit For Surface Mounting
164.10 Each inc. vat
136.75 ex. vat
PW264 - 90m Pigeon Post and Wire Kit For Surface Mounting
206.70 Each inc. vat
172.25 ex. vat

Specification

Each kit contains the following:

15m Kit 30m Kit 60m Kit 90m Kit
Pigeon Wire 0.45mm 1 X 7 304 Stainless Nylon Coated 50m 100m 200m 200m
Pigeon Post 90mm Single Headed Front Row 11 21 41 61
Pigeon Post 130mm Single Headed Second Row 11 21 41 61
Surface Mount Base 26 46 86 126
Pigeon Wire Standard Spring 20 40 80 120
Bird Wire Nickel Crimp 100 100 200 300
Surface Activator 500ml 1 1 1 1
Silicone Adhesive 300ml 1 1 1 1
Bird Wire Crimp Tool 1 1 1 1

Usage

This kit is intended for use on non-masonry substrates that cannot take anchor rivets including metal, plastic, ceramics, roof tiles and glass. If you require post & wire to be used on masonry substrates then you should consider using our post and wire masonry kit or our range of specialist brackets for gutters, steel beams, pipes or rails.

This surface mount kit for pigeon post and wire provides sufficient materials for a run of front 90mm single-head posts followed by a parallel second row (max 65mm behind first row) of single-head 125mm posts.

Once the posts are seated in their surface mount bases the heads of the posts, and hence the wire, will be at at height of 90mm and 130mm respectively above the surface being protected.

Maximum linear distance between pigeon wire posts = 1500mm (1.5m)

Pigeon wire should be spring tensioned every 1500mm (1.5m) along its run, i.e. the wire should stop at a spring on each post and start with a newly crimped section of the other side of the post.

In doing so you are spreading the load evenly across the post system and thus avoiding spring overload

Do not thread the pigeon wire through the eyelets of the post and onwards to the next post, as this will cause the system to sag and go out of shape.

The system should be counter-tensioned at the end of each run using the screw-pin and plugs provided. To avoid the system from sagging do not use springs in the counter-tension wires.

It is vital that on non porous substrates that surface activator be applied to prepare the surface before bonding

In all cases the surface mount base should have its underside treated with surface activator prior to bonding.

ALWAYS insert the bird post into the surface mount base before you stick the base down, this ensures that glue does not set in the post socket (which makes it impossible to insert the post into the socket once the glue has cured) and that the base does not become delaminated whilst trying to retrofit the post into its socket.

Downloads

PestFix Post & Wire System Technical Specification

PestFix Post & Wire System Technical Specification

Pigeon Spikes
Netting For Pigeons
Pigeon Post and Wire
Pigeon Deterrents
Chimney Protection
Cleaning and Disposal
Common Problem Areas
Trade Customers
Resource Centre
Customer Services
Contact Us