Product Index 
Call our Sales Team
01903 538 488
Mon - Fri 8am - 6pm
My Account
GBPLogin0 Items
Product Index 
Call our Sales Team
01903 538 488
Mon - Fri 8am - 6pm
My Account
GBPLogin0 Items
Call our Sales Team
01903 538 488
Mon - Fri 8am - 6pm
My Account
GBPLogin0 Items
01903 538 488
My Account
MENU

Bird Proof - Bird Repellent Gel

Bird Proof - Bird Repellent GelBird Proof - Bird Repellent GelBird Proof - Bird Repellent GelBird Proof - Bird Repellent GelBird Proof - Bird Repellent Gel
BP - Bird Proof - Bird Repellent Gel 10oz (283g)Tube
25.18 per 10 oz (283g) inc. vat
20.98 ex. vat
Quantity Discounts
12 +23.92
BP-CART - Bird Proof - Bird Repellent Gel - Case of 12 X 10oz (283g)Tubes
251.99 per 12 Pack inc. vat
209.99 ex. vat

Specification

This product may be used to repel pigeons, starlings and sparrows from buildings and adjacent structures. This product may be applied to window sills, roof lines, gutter edges, signage, ornamental copings, cornices, ledges, poarapet walls and similar structures.

WEAR DISPOSABLE GLOVES WHEN USING THIS PRODUCT. Do not apply this product in wet weather conditions, surfaces should be clean & dry.

Do not apply this product in temperatures below freezing. Product should be approximately room temperature (65-80F or 18-27C) at the time of application.

Do not apply when repellent may entangle small garden bird species, on or near bird feeders, or on vegetation / structures supporting bird feeders.

PRECAUTIONS

Before using this product on porous masonry, such as brick, stone or concrete, the surface should be sealed using a proprietary masonry sealant, to prevent this product from sinking into the pores of the masonry and staining the building

This precaution is only necessary on porous surfaces. Untreated timber should be sealed using a suitable varnish or paint prior to application. Non porous surfaces such as metal and plastic should simply be wiped-over with a surface cleaner / de-greaser prior to application

This product does not set, it remains wet and tacky and may trap very small garden birds id mis-used. DO NOT USE IN SITUATIONS WHERE SMALL, NON-TARGET BIRDS MAY BECOME TRAPPED. If you are in any doubt about how to use this product please call us for advice prior to ordering.

Usage

Use on ledges, sills, beams, rafters and hundreds of other indoor and outdoor locations where nuisance birds alight or roost.

Bird Proof repellent can effectively discourage pigeons, starlings, house sparrows and certain other nuisance birds from roosting on or returning to a treated area for up to one year.

PREPARING SURFACES FOR TREATMENT

1. To reduce potential exposure to bird related diseases wear waterproof gloves and a P3-grade respirator for dust protection when cleaning areas to be treated. Prepare surfaces to be treated by removing dirt, droppings and other debris. Using water mixed with PX Ornikill or similar disinfectant, wet surfaces to be cleaned to limit the generation of airbourne dust. Allow cleaned surfaces to dry fully prior to treatment as product adhesion may be poor on wet surfaces.

2. Check on the condition of the surface to which the repellent is to be applied. Treat porous surfaces such as wood, stone or concrete with an undercoating such as paint or sealer before applying Bird-X Bird-Proof Repellent Gel. On asphalt or wood shingles, or any other surface from which relatively easy removal of the product is desired, apply waterproof tape or similar material first and apply the repellent to the tape rather than directly to the substrate.

APPLICATION DIRECTIONS

1. Place cartridge in a caulking gun

2. Angle-cut the cartridge nozzle to desired bead width: 1/4" (6mm) for starlings and pigeons, 1/8" (3mm) for house sparrows. DONOT APPLY BEADS WIDER THAN THOSE INDICATED.

3. Beginning 1" (2.5cm) from outside edge apply product in a line travelling the length of the surface to be treated. Leave a 1" (2.5cm) gap in the bead every 10" or 25cm to allow for drainage. One such bead should be sufficient on surfaces up to 4" (10cm) wide. For surfaces of 4"-8" (10-20cm) wide apply two parallel beads spaced 2" (5cm) apart, with the outermost bead being 1" from the outer edge. On surfaces wider than 8" (20cm) apply a series of parallel beads 2-3" (5-7cm) apart or apply two parallel beads 1" (2.5cm) and a repeating S-shaped line throughout the area between the beads.

4. 1 ounce of product will cover 1 linear foot of the bead width indicated for Starlings and Pigeons. Less product will be needed per linear foot of the bead width for indicated sparrows.

5. The effectiveness of this product will diminish if it becomes largely covered with dirt and debris. In such cases clean the surface and repeat treatment.

6. Keep plastic cap on opened cartridge to prevent product contacting eyes.

CLEAN UP

Remove product from person and application equipment by using vegetable oil first, followed by soap and water. Clean treated surfaces by removing masking tape (if used) and by scraping-off material and applying mineral / white spirits. Wear appropriate skin and respiratory protection when performing these tasks.

Pigeon Spikes
Bird Shock
Pigeon Post and Wire
Netting For Pigeons
Pigeon Deterrents
Chimney Protection
Cleaning and Disposal
Common Problem Areas
Trade Customers
Resource Centre
Customer Services
Contact Us