Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop
Pigeon Wire Triangular Ridge Bracket 3-Post X 110mm
Pigeon Wire Triangular Ridge Bracket 3-Post X 110mm
Pigeon Wire Triangular Ridge Bracket 3-Post X 110mm
Click image to enlarge
  • Stainless steel ridge bracket for mounting pigeon wire over ridge lines
  • Supports three parallel runs of pigeon wire
  • Prevents pigeons from fouling ridges by placing wire where they want to land
  • 110mm X 4mm single head posts, use one bracket every 1.5m
  • Can be screwed down or glued using Fix All

Specification

Stainless steel ridge bracket designed to carry three parallel runs of wire along roof ridges to keep pigeons from landing on the ridge tiles and fouling them

The bracket base is designed to fit triangular ridge/hip tiles.

The posts are each 110mm tall by 4mm in diameter with eyelets stamped in their tops as per the normal pigeon posts.

Usage

For Use in protecting triangular roof ridges from perching feral pigeons and preventing the roof from being affected by bird droppings.

Use as a low-profile alternative to bird spikes on low pressure bird infestations.

Brackets can be fixed to ridges in two different ways.

  • Bonding, preferred method, strongest (remove legs)
  • Mechanical Fix using screws in the holes provided, (remove legs) requires drilling of the ridge tile

The bonding method is ideal for fragile tiles that do not take kindly to drilling. Ensure ridge tile is clean and dry and has been primed with adhesive prior to fitting bracket. Ensure that the bracket has been de-greased on the underside using surface activator. Leave for 24 hours to fully cure before wiring.

1. Install brackets at no more than 1.5m centres

2. Install counter tension wires and screw pin anchor at each end of the ridge line without springs.

3. Run wires, stopping and starting at each bracket with a crimp and spring (do not run wires through the bracket)

4. Ensure wires are under load from the springs, but do not over-stretch the spring, leave some spring travel for when birds attempt to land.

PW212 Pigeon Wire Triangular Ridge Bracket 3-Post X 110mm12.00Each ex.VAT
Similar Products
Fix All Crystal Super Clear SMX Hybrid Polymer Adhesive - Soudal
From 6.98 290ml
Surface Activator 500ml
From 14.52 500ml
Pigeon Wire Reel
From 9.44 50m Reel
Pigeon Wire Standard Spring 100 Pack
From 18.24 100 Pack
Nickel Crimp For Bird Wire 100 Pack
From 4.26 100 Pack
Screw Pin and Plug Masonry Anchor Fixing 10 Pack
From 4.33 10 Pack