Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products »
Browse Products
Bird Stop

Pigeon Wire For Surface Mounting

In this section you will find everything you need to surface-mount our post and wire system onto surfaces that cannot be pierced including cladding, uPVC, glass, lead-work and metal in order to easily cure Feral Pigeon infestations. This is achieved by the wire system being set into special surface-mount bases using posts at the correct height to prevent feral pigeons Columbia Liva from landing on the surface being protected and hence from defecating over the side onto whatever lies below.

Surface-mount post and wire systems are quick and easy to install on any surface provided stringent cleaning and surface preparation processes are followed, for areas deeper than 65mm parallel rows of wire should be installed at 65mm intervals

Pigeon wire for surface-mounting is a low-profile alternative to using our quick and easy bird spike systems.

If you are unsure of what you need then perhaps one of our post and wire surface-mount kits is for you, or alternatively please call us on the number at the top of the page for advice and guidance on what and how much to order for your project.

Pigeon Post and Wire Kits For Surface Mounting
Pigeon Post and Wire Kits For Surface Mounting
  • Ideal for proofing metal, plastic or glass surfaces that cannot be pierced
  • All metal components made in stainless steel
  • Everything you need to complete the job in one handy kit
  • Available in 15m, 30m, 60m & 90m kit variants
  • Enough components for a double run of wire and posts set up to 65mm apart
  • For kit component list see "more information"
  • Also suitable for mounting post and wire systems on to roof tiles & slates
More Information»
15m Pigeon Post and Wire Kit For Surface Mounting (PW261)£65.27Each ex.VAT
30m Pigeon Post and Wire Kit For Surface Mounting (PW262)£87.45Each ex.VAT
60m Pigeon Post and Wire Kit For Surface Mounting (PW263)£140.80Each ex.VAT
90m Pigeon Post and Wire Kit For Surface Mounting (PW264)£178.71Each ex.VAT
Pigeon Posts for Surface Mounting
Pigeon Posts for Surface Mounting
  • For use with surface mount bases to keep pigeons off ledges
  • Pigeon post simply slots in to the surface mount base's in-built socket
  • Surface mount bases and adhesive are sold seperately
  • Use 90mm posts for front row
  • Use 130mm posts for second row
  • Manufactured from stainless steel
More Information»
Bird Post 90mm Single Head Front Row Surface Mount 100 Pack (PW215)£41.69100 Pack ex.VAT
Bird Post 130mm Single Head 2nd Row Surface Mount 100 Pack (PW214)£47.62100 Pack ex.VAT
Surface Mount Base
Surface Mount Base
  • Nylon base for use in mounting 4mm bird wire posts on surfaces that can not be drilled
  • Can also be used to hold bird netting perimeter wire ropes to surfaces that can not be drilled
  • Suitable for metal, plastic, glass and wood suppplied in grey, white, stone or black.
  • Can be bonded using Silirub N or Fix All or screwed in place using pre-drilled holes
  • For bonding use surface activator to clean the base and the surface being adhered to
More Information»
Surface Mount Base - Grey X 10 (PW219-10)£3.5510 Pack ex.VAT
Surface Mount Base - Grey X 100 (PW219-100)£27.29100 Pack ex.VAT
Surface Mount Base - Stone X 10 (PW220-10)£3.5510 Pack ex.VAT
Surface Mount Base - Stone X 100 (PW220-100)£27.29100 Pack ex.VAT
Surface Mount Base - White X 10 (PW221-10)£3.5510 Pack ex.VAT
Surface Mount Base - White X 100 (PW221-100)£27.29100 Pack ex.VAT
Surface Mount Base - Black X 10 (PW222-10)£3.5510 Pack ex.VAT
Surface Mount Base - Black X 100 (PW222-100)£27.29100 Pack ex.VAT
Defender 4mm Bird Post Surface-Mount Base - Grey - 333mm
Defender 4mm Bird Post Surface-Mount Base - Grey - 333mm
  • Drastically cuts installation time, reduces drilling
  • Each strip protects up to 333mm of ledge
  • Can be glued or screwed into position
  • Suitable for both pigeon & seagull wire systems
  • Ideal for fragile masonry substrates where drilling could cause damage
  • Ideal for non-penetrateable substrates including lead sills, parapets etc

Quantity Discounts

10 +  £2.85100 +  £2.70
More Information»
Defender 4mm Bird Post Surface-Mount Base - Grey - 333mm (PW313)£3.00Each ex.VAT
Soudal Silirub N Silicone Adhesive 300ml Clear Neutral Cure Low Modulus
Soudal Silirub N Silicone Adhesive 300ml Clear Neutral Cure Low Modulus
  • High quality, neutral-curing silicone adhesive in a 300ml frame gun tube
  • QUANTITY DISCOUNTS AUTOMATICALLY APPLIED TO YOUR BASKET
  • 6+ tubes £2.30 + vat each
  • 12+ tubes £2.18 + vat each
  • 18+ tubes £2.06 + vat each
  • Case prices from £1.94 + vat per tube, 24 x 300ml
  • For use with a caulking gun
  • Stays permanently elastic after curing
More Information»
Silicone Spike Adhesive 300ml Soudal Silirub N Clear (BS327-EACH)£2.43300ml ex.VAT
Silicone Spike Adhesive Case Price 24 x 300ml (BS328)£46.32Case of 24 ex.VAT
Surface Activator 500ml
Surface Activator 500ml
  • 3-in-1 cleaner, degreaser and etch-primer. Supplied in 500ml flasks
  • Activates non-porous surfaces such as plastics, synthetic coatings and metals for improved adhesion of our Soudal Silirub N silicone spike adhesive and Fix All adhesive
  • Apply with clean paper towel or tissue. Drying time 5 minutes.
  • Always read the label before use.

Quantity Discounts

4 +  £15.328 +  £14.52
More Information»
Surface Activator 500ml (BS365)£16.13500ml ex.VAT
Pigeon Wire Reel
Pigeon Wire Reel
  • UV-coated stainless steel pigeon wire
  • 0.45mm diameter wire coated to 0.7mm in diameter
  • Use with nickel plated crimps
More Information»
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 50m (PW200)£9.4450m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 100m (PW201)£15.74100m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 250m (PW202)£36.74250m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 x 7 304 Stainless Nylon Coated X 500m (PW203)£72.44500m Reel ex.VAT
Pigeon Wire Standard Spring 100 Pack
Pigeon Wire Standard Spring 100 Pack
  • Stainless steel high tensile springs
  • Used to maintain tension in pigeon wire
  • Attach springs between the wire and the posts
More Information»
Pigeon Wire Standard Spring 100 Pack (PW207)£18.24100 Pack ex.VAT
Nickel Crimp For Bird Wire 100 Pack
Nickel Crimp For Bird Wire 100 Pack
  • For use in securing 0.45mm diameter Pigeon Wire to posts and springs
  • Use with a bird crimp tool
  • Not compatible with seagull wire

Quantity Discounts

5 +  £4.4910 +  £4.26
More Information»
Nickel Crimp For Bird Wire 100 Pack (PW208)£4.73100 Pack ex.VAT
Bird Wire Crimp Tool
Bird Wire Crimp Tool
  • Pliers with specially shaped jaws
  • Specifically designed for crimping pigeon and gull wire
  • Also features a cutter tool
More Information»
Bird Wire Crimp Tool (PW241)£20.99Each ex.VAT
Screw Pin and Plug Masonry Anchor Fixing 10 Pack
Screw Pin and Plug Masonry Anchor Fixing 10 Pack
  • Use to counter tension each end of a run of bird wire
  • can also be used as a low profile netting intermediate fixing for masonry
  • 35mm length overall, 20mm threaded length, manufactured in stainless steel
  • Use with a 6mm masonry drill bit
  • Red Wall Plugs included
More Information»
Screw Pin and Plug Masonry Anchor Fixing 10 Pack (PW211)£4.3310 Pack ex.VAT
6mm Masonry Drill Bit
6mm Masonry Drill Bit
  • Masonry Drill Bit 6mm diameter
  • Available in SDS 6mm X 100mm and straight shank 6mm X 150mm
  • Suitable for Red Wall Plugs, NF290 Wire Hanger & NF288 Anker Eye Bolt
More Information»
6mm X 100mm Masonry Drill Bit - SDS (NT129)£3.14Each ex.VAT
6mm X 150mm Masonry Drill Bit - Straight Shank (NT128)£1.87Each ex.VAT