Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop

Pigeon Wire For Steelwork

In this section you will find everything you need to mount our post and wire system onto the flanges of structural steel beams in order to easily cure Feral Pigeon infestations. This is achieved by the wire being set at the correct height to prevent feral pigeons Columbia Liva from landing on flange and defecating over the side onto whatever lies below.

Post and wire systems are quick and easy to install on the flanges of steel beams, with a simple clamp on the base of each post that you tighten to clamp the system to the leading edge, everything else is the same as our standard post and wire system.

Pigeon wire for steelwork is a low-profile alternative to using our quick and easy bird spike systems.

If you are unsure of what you need then perhaps one of our post and wire steelwork kits is for you, or alternatively please call us on the number at the top of the page for advice and guidance on what and how much to order for your project.

Pigeon Posts for Steelwork
Pigeon Posts for Steelwork
  • Stainless steel clamp on pigeon post
  • Ideal for clamping bird wire onto beams
  • 4mm diameter posts
  • Available in 95mm and 150mm lengths
  • Posts are clamped perpendicular to the mounting surface
More Information
Beam Clamp Pigeon Post Single Head 95mm X 4mm 10 Pack (PW218)52.4910 Pack ex.VAT
Counter Tension Beam Clamp 20mm - Stainless Steel (PW289)14.3710 Pack ex.VAT
Counter Tension Beam Clamp 20mm - Stainless Steel
Counter Tension Beam Clamp 20mm - Stainless Steel
  • Stainless steel counter tension anchor clamp with 20mm jaw size.
  • Anchor-point for counter-tensioning post & wire systems mounted on gutters & steelwork.
  • Max gutter / flange thickness 20mm.
  • Requires a 10mm spanner to tighten nut.
  • Use one clamp at each end of a run of post and wire to prevent posts leaning inwards.
More Information
Counter Tension Beam Clamp 20mm - Stainless Steel (PW289)14.3710 Pack ex.VAT
Pigeon Wire Reel
Pigeon Wire Reel
  • UV-coated stainless steel pigeon wire
  • 0.45mm diameter wire PVC coated to 0.7mm in diameter
  • Use with nickel plated crimps and springs between posts
More Information
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 50m (PW200)9.4450m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 100m (PW201)15.74100m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 250m (PW202)36.74250m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 x 7 304 Stainless Nylon Coated X 500m (PW203)72.44500m Reel ex.VAT
Pigeon Wire Standard Spring
Pigeon Wire Standard Spring
  • Stainless steel (304) high tensile springs
  • Used to maintain tension in pigeon wire installations
  • Attach springs between the wire and the posts
  • Use one spring per bird post
More Information
Pigeon Wire Standard Spring (PW207)18.24100 Pack ex.VAT
Nickel Plated Crimp For Pigeon Wire Termination
Nickel Plated Crimp For Pigeon Wire Termination
  • For use in terminating pigeon wire against posts, split pins and screw pins
  • Use with a bird crimp tool
  • Gives a slip-free wire termination against which spring tension can be installed
  • Not compatible with seagull wire

Quantity Discounts

5 +  4.4910 +  4.26
More Information
Nickel Plated Crimp For Pigeon Wire Termination (PW208)4.73100 Pack ex.VAT
Bird Wire Combi Crimp and Cut Tool
Bird Wire Combi Crimp and Cut Tool
  • Pliers with specially shaped jaws for crimping Nickel Crimps on to Pigeon Wire
  • Specifically designed for crimping pigeon and gull wire crimps
  • Also features a cutter tool
More Information
Bird Wire Combi Crimp and Cut Tool (PW241)20.99Each ex.VAT
Pigeon Post and Wire Kits For Steelwork
Pigeon Post and Wire Kits For Steelwork
  • Complete kits for mounting pigeon post & wire on the flanges of structural steelwork
  • Prevents pigeons landing on steelwork and defecating on whatever is underneath.
  • Quick and easy to install using tools provided plus a 10mm spanner.
  • Low profile alternative to using bird spikes, with all stainless steel components.
  • Sold in single head and double head variants (see usage) & in 15m or 30m sizes.
  • Double head kits temporarily unavailable

More Information
15m Pigeon Post and Wire Kit For Steelwork - Single Head (PW285)83.26Each ex.VAT
30m Pigeon Post and Wire Kit For Steelwork - Single Head (PW286)131.94Each ex.VAT