Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products »
Browse Products
Bird Stop

Pigeon Wire For Roof Ridges

In this section you will find everything you need to mount our post and wire system onto the ridge-lines of pitched tiled roofs in order to easily cure Feral Pigeon infestations. This is achieved by the wire system being set onto the ridge line in a triple run using special ridge brackets with in-built posts set at the correct height to prevent feral pigeons Columbia Liva from landing on the ridge tile and defecating over the roof tiles or down the gable end of the building.

Post and wire systems are quick and easy to install on either half-round ridge tiles or triangular ridge tiles, by either mechanically fixing or bonding (recommended) the ridge brackets to the ridge tiles at 1.5m intervals.

Pigeon wire for ridge lines a low-profile alternative to using our quick and easy bird spike systems.

If you are unsure of what you need then perhaps one of our post and wire ridge tile kits is for you, or alternatively please call us on the number at the top of the page for advice and guidance on what and how much to order for your project.

Pigeon Wire Triangular Ridge Bracket 3-Post X 110mm
Pigeon Wire Triangular Ridge Bracket 3-Post X 110mm
  • Stainless steel ridge bracket for mounting pigeon wire over ridge lines
  • Supports three parallel runs of pigeon wire
  • Prevents pigeons from fouling ridges by placing wire where they want to land
  • 110mm X 4mm single head posts, use one bracket every 1.5m
  • Can be screwed down or glued using Fix All
More Information»
Pigeon Wire Triangular Ridge Bracket 3-Post X 110mm (PW212)£12.00Each ex.VAT
Pigeon Wire Half Round Ridge Bracket 3-Post X 90mm
Pigeon Wire Half Round Ridge Bracket 3-Post X 90mm
  • Stainless steel ridge bracket designed to facilitate pigeon wire installations along ridge lines
  • Supports three parallel runs of wire along roof ridge
  • Prevents pigeons from fouling ridges
  • 90mm X 4mm single head posts
  • Can be screwed down, clamped down or glued in positioned (preferred)
More Information»
Pigeon Wire Half Round Ridge Bracket 3-Post X 90mm (PW213)£16.35Each ex.VAT
Gull Wire Reel
Gull Wire Reel
  • Grade 304 stainless steel 1x7 construction seagull wire
  • 0.96mm in diameter
  • For use with our 1mm copper crimps (PW228) and micro springs(PW227)
  • N.B. Nickle Crimps will not fit this product.
More Information»
Gull Wire Reel 0.96mm 1 X 7 304 Stainless X 50m (PW249)£14.1550m Reel ex.VAT
Gull Wire Reel 0.96mm 1 X 7 304 Stainless X 100m (PW250)£23.60100m Reel ex.VAT
Gull Wire Reel 0.96mm 1 X 7 304 Stainless X 250m (PW225)£55.10250m Reel ex.VAT
Gull Wire Reel 0.96mm 1 X 7 304 Stainless X 500m (PW251)£104.45500m Reel ex.VAT
Micro Spring Stainless Steel For Gull Wire 100 pack
Micro Spring Stainless Steel For Gull Wire 100 pack
  • Stainless steel high tensile spring
  • Sold in packs of 100
  • Use in-line with seagull wire to maintain the wire's tension
  • Attach springs between the wire and the posts
More Information»
Micro Spring Stainless Steel For Gull Wire 100 pack (PW227)£18.89100 Pack ex.VAT
1.0mm Gull Wire Copper Crimps 100 Pack
1.0mm Gull Wire Copper Crimps 100 Pack
  • Copper crimps for securing 0.96mm Seagull Wire to Gull Posts and Gull Wire Micro Springs
  • 1 CU DIN for use with 0.96mm wire
  • Sold in packs of 100
  • Use either with our bird wire crimp tool or our ratchet crimp tool.
More Information»
1.0mm Gull Wire Copper Crimps 100 Pack (PW228)£10.49100 Pack ex.VAT
Bird Wire Crimp Tool
Bird Wire Crimp Tool
  • Pliers with specially shaped jaws
  • Specifically designed for crimping pigeon and gull wire
  • Also features a cutter tool
More Information»
Bird Wire Crimp Tool (PW241)£20.99Each ex.VAT
Screw Pin and Plug Masonry Anchor Fixing 10 Pack
Screw Pin and Plug Masonry Anchor Fixing 10 Pack
  • Use to counter tension each end of a run of bird wire
  • can also be used as a low profile netting intermediate fixing for masonry
  • 35mm length overall, 20mm threaded length, manufactured in stainless steel
  • Use with a 6mm masonry drill bit
  • Red Wall Plugs included
More Information»
Screw Pin and Plug Masonry Anchor Fixing 10 Pack (PW211)£4.3310 Pack ex.VAT
6mm Masonry Drill Bit
6mm Masonry Drill Bit
  • Masonry Drill Bit 6mm diameter
  • Available in SDS 6mm X 100mm and straight shank 6mm X 150mm
  • Suitable for Red Wall Plugs, NF290 Wire Hanger & NF288 Anker Eye Bolt
More Information»
6mm X 100mm Masonry Drill Bit - SDS (NT129)£3.14Each ex.VAT
6mm X 150mm Masonry Drill Bit - Straight Shank (NT128)£1.87Each ex.VAT