Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop

Pigeon Wire For Masonry

In this section you will find everything you need to mount our post and wire system onto masonry substrates including; brick, mortar, render, concrete, natural stone and reconstituted stone in order to easily cure Feral Pigeon infestations. This is achieved by the wire system being set into the masonry using special anchor rivets and posts at the correct height to prevent feral pigeons Columbia Liva from landing on the ledge, cornice parapet or sill and defecating over the side onto whatever lies below.

Post and wire systems are quick and easy to install on masonry with a good quality drill, for ledges or parapets deeper than 65mm parallel rows of wire should be installed at 65mm intervals

Pigeon wire for masonry is a low-profile alternative to using our quick and easy bird spike systems.

If you are unsure of what you need then perhaps one of our post and wire masonry kits is for you, or alternatively please call us on the number at the top of the page for advice and guidance on what and how much to order for your project.

Pigeon Posts for Masonry
Pigeon Posts for Masonry
  • For use with masonry rivets to keep pigeons off ledges
  • Use at least two rows of posts
  • Use 115mm single head or 130mm double head posts for front row
  • Use 150mm single head posts for second row
  • Manufactured from 304 stainless steel
More Information
Pigeon Post 115mm Single Headed Front Row For Masonry 100 Pack (PW204)46.13100 Pack ex.VAT
Pigeon Post 130mm Double Headed Front Row For Masonry 100 Pack (PW205)59.63100 Pack ex.VAT
Pigeon Post 150mm Single Headed Second Row For Masonry 100 Pack (PW206)44.68100 Pack ex.VAT
Pigeon Wire 6mm Drilled Rods - Stainless Steel
Pigeon Wire 6mm Drilled Rods - Stainless Steel
  • Save 10% when you order 10+ packs of one size
  • An efficient way of installing multiple runs of pigeon wire on wide ledges
  • Reduces drilling and installation time
  • Creates a neat and uniform appearance for a professional finish
  • Grade 304 stainless steel 6mm diameter rod for long service life
  • Available in 320mm - 580mm sizes with 4 - 8 holes at 65mm centres
More Information
Drilled Rods 320mm X 6mm x 4 holes 65mm centres (PW307)29.0410 Pack ex.VAT
Drilled Rods 385mm X 6mm x 5 holes 65mm centres (PW308)36.6410 Pack ex.VAT
Drilled Rods 450mm X 6mm x 6 holes 65mm centres (PW309)43.3410 Pack ex.VAT
Drilled Rods 515mm X 6mm x 7 holes 65mm centres (PW310)50.0410 Pack ex.VAT
Drilled Rods 580mm X 6mm x 8 holes 65mm centres (PW311)56.7410 Pack ex.VAT
Masonry Rivet - For 4mm Bird Posts and 4mm Split Pins X 100
Masonry Rivet - For 4mm Bird Posts and 4mm Split Pins X 100
  • Nylon Anchor Rivet available in 25mm & 38mm lengths
  • 25mm rivets available in grey & stone colour. 38mm in grey only.
  • Used for securing 4mm bird posts and/or 4mm split pins into masonry surfaces.
  • Shouldered design keeps moisture from entering hole and prevents freeze-thaw wear.
  • Sold in packs of 100 rivets, required a 6.5mm diameter hole
More Information
25mm Masonry Rivet - Grey X 100 (PW209)9.30100 Pack ex.VAT
25mm Masonry Rivet - Stone X 100 (PW210)9.30100 Pack ex.VAT
38mm Masonry Rivet - Grey X 100 (PW254)11.76100 Pack ex.VAT
Split Pin 4mm Stainless Steel Masonry Fixing x 100
Split Pin 4mm Stainless Steel Masonry Fixing x 100
  • Available in 25mm and 38mm lengths
  • Grade 304 stainless steel split pin, supplied in packs of 100.
  • Discrete anchor fixing for window reveals and counter-tensioning.
  • To be inserted in a 25mm or 38mm masonry anchor rivet.
  • Bird wire springs can be directly attached to the split pin eye.
More Information
Split Pin 25mm X 4mm Stainless Counter Tension Masonry Anchor X 100 (PW247)13.55100 Pack ex.VAT
Split Pin 38mm X 4mm Stainless Counter Tension Masonry Anchor X100 (PW253)15.18100 Pack ex.VAT
6.5mm Masonry Drill Bit For Masonry Anchor Rivets
6.5mm Masonry Drill Bit For Masonry Anchor Rivets
  • 6.5mm masonry drill bit
  • Suitable for drilling the holes required for masonry anchor rivets
  • Available in Straight Shank 6.5mm x 150mm or SDS 6.5mm x 100mm
More Information
Masonry Drill Bit 6.5mm For use with Anchor Rivets - Straight Shank (PW242)2.09Each ex.VAT
Masonry Drill Bit 6.5mm For use with Anchor Rivets - SDS (PW243)3.14Each ex.VAT
Screw Pin and Plug Masonry Anchor Fixing 10 Pack
Screw Pin and Plug Masonry Anchor Fixing 10 Pack
  • Use to counter tension each end of a run of bird wire
  • can also be used as a low profile netting intermediate fixing for masonry
  • 35mm length overall, 20mm threaded length, manufactured in stainless steel
  • Use with a 6mm masonry drill bit
  • Red Wall Plugs included
More Information
Screw Pin and Plug Masonry Anchor Fixing 10 Pack (PW211)4.3310 Pack ex.VAT
6mm Masonry Drill Bit
6mm Masonry Drill Bit
  • Masonry Drill Bit 6mm diameter
  • Available in SDS 6mm X 100mm and straight shank 6mm X 150mm
  • Suitable for Red Wall Plugs, NF290 Wire Hanger & NF288 Anker Eye Bolt
More Information
6mm X 100mm Masonry Drill Bit - SDS (NT129)3.14Each ex.VAT
6mm X 150mm Masonry Drill Bit - Straight Shank (NT128)1.87Each ex.VAT
Pigeon Wire Reel
Pigeon Wire Reel
  • UV-coated stainless steel pigeon wire
  • 0.45mm diameter wire coated to 0.7mm in diameter
  • Use with nickel plated crimps
More Information
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 50m (PW200)9.4450m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 100m (PW201)15.74100m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 X 7 304 Stainless Nylon Coated X 250m (PW202)36.74250m Reel ex.VAT
Pigeon Wire Reel 0.45mm 1 x 7 304 Stainless Nylon Coated X 500m (PW203)72.44500m Reel ex.VAT
Nickel Crimp For Bird Wire 100 Pack
Nickel Crimp For Bird Wire 100 Pack
  • For use in securing 0.45mm diameter Pigeon Wire to posts and springs
  • Use with a bird crimp tool
  • Not compatible with seagull wire

Quantity Discounts

5 +  4.4910 +  4.26
More Information
Nickel Crimp For Bird Wire 100 Pack (PW208)4.73100 Pack ex.VAT
Bird Wire Crimp Tool
Bird Wire Crimp Tool
  • Pliers with specially shaped jaws
  • Specifically designed for crimping pigeon and gull wire
  • Also features a cutter tool
More Information
Bird Wire Crimp Tool (PW241)20.99Each ex.VAT
Pigeon Post and Wire Kits For Masonry
Pigeon Post and Wire Kits For Masonry
  • Ideal for proofing masonry cornices, ledges, parapets, sills, balustrades and buttresses
  • All metal components made in stainless steel
  • Everything you need to complete the job in one handy kit
  • Available in 15m, 30m, 60m & 90m kit variants
  • Enough components for a double run of wire and posts set up to 65mm apart
  • For kit component list see "more information"
  • Can be used on brick, natural stone, concrete, render and reconstituted stone
More Information
15m Pigeon Post and Wire Kit For Masonry (PW257)52.61Each ex.VAT
30m Pigeon Post and Wire Kit For Masonry (PW258)77.54Each ex.VAT
60m Pigeon Post and Wire Kit For Masonry (PW259)125.82Each ex.VAT
90m Pigeon Post and Wire Kit For Masonry (PW260)173.21Each ex.VAT