Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop

Netting Mounts

Netting Mounts are used to lift or suspend bird netting off the surface that it is protecting sufficiently high enough to prevent the pest birds pushing the netting down onto the surface and then landing on it.

We offer a comprehensive range of netting mounts to suit the area being netted. Some lift the net just enough to provide adequate protection whilst others allow enough lift for maintenance access underneath.

Half Round Ridge Net Mount
Half Round Ridge Net Mount
  • Lifts netting wire rope supporting framework off ridge line by 500mm
  • Ideal for netting over pitched roofs
  • Prevents birds from pushing net down onto roof surface
  • Stainless steel construction for long service life
More Information
Half Round Ridge Net Mount (NF220)24.35Each ex.VAT
Triangular Ridge Net Mount
Triangular Ridge Net Mount
  • Lifts netting wire rope supporting framework off ridge line by 500mm
  • Ideal for netting over pitched roofs
  • Prevents birds from pushing net down onto roof surface
  • Stainless steel construction for long service life
More Information
Triangular Ridge Net Mount (NF221 )18.39Each ex.VAT
Non Piercing Flat Roof Mount 500mm and 1000mm - Stainless Steel
Non Piercing Flat Roof Mount 500mm and 1000mm - Stainless Steel
  • Free-standing, non-piercing roof mount used for flat roof netting frameworks
  • Available in 0.5m & 1m lightweight, durable box section 316 stainless steel.
  • The mount is held in place using the wire rope netting perimeter framework.
  • 8mm diameter hole in each face at top of mount accepts an M5 barrel strainer hook.
  • Ideal for situations where the roof membrane cant be pierced with mechanical fixings.
More Information
Non Piercing Flat Roof Mount 500mm Stainless Steel - Each (NF184)25.36Each ex.VAT
Non Piercing Flat Roof Mount 1000mm Stainless Steel - Each (NF185)27.37Each ex.VAT
Dormer Roof Intermediate Bracket 380mm - Stainless Steel
Dormer Roof Intermediate Bracket 380mm - Stainless Steel
  • For use along the outside edge of flat roofs for both pigeons and seagulls.
  • 380mm high designed to lift netting off flat roofs, whilst looking acceptable at the same time.
  • Made from stainless steel to give a durable long-life construction.
  • Secured using coach screws and silicone through 4 X 10mm hole.
  • 10mm holes provided at the top and bottom of the upright to accept barrel strainer hooks.
More Information
Dormer Roof Intermediate Bracket 380mm - Stainless Steel (NF183)29.20Each ex.VAT
Dormer Roof Corner Bracket 380mm - Stainless Steel
Dormer Roof Corner Bracket 380mm - Stainless Steel
  • For use on the outside corners of flat roofs for both pigeons and seagulls.
  • 380mm high designed to lift netting off flat roofs, whilst looking acceptable at the same time.
  • Made from stainless steel to give a durable long-life construction.
  • Secured using coach screws and silicone through 8 X 10mm hole.
  • 10mm holes provided at the top and bottom of the upright to accept barrel strainer hooks.
More Information
Dormer Roof Corner Bracket 380mm - Stainless Steel (NF182)39.99Each ex.VAT
Non Piercing Caddy Pyramid Base Roof Mount
Non Piercing Caddy Pyramid Base Roof Mount
  • Non piercing netting roof mount base accepts standard strut channels which can be cut to length
  • Foam bottom offers low abrasion interface for better roof membrane protection
  • Compatible with roof surfaces including single ply, bituminous, metal and spray foam
  • Hot-dip galvanized and UV stabilized for long lasting performance

Quantity Discounts

10 +  30.6450 +  29.03100 +  27.41
More Information
Non Piercing Caddy Pyramid Base Roof Mount (NF291)32.25Each ex.VAT
Intermediate Non Piercing Roof Mount
Intermediate Non Piercing Roof Mount
  • Heavy duty non-piercing roof mount, hot dipped galvanised steel
  • Ideal for us as an intermediate mount for bird netting in industrial or commercial applications
  • Requires 2 x 450mm x 450mm paving slabs to prevent wind lift
  • 4 X holes in pole top, 12mm dia. accepts the hook of M5, M6 & M8 barrel strainers
  • Available in either 1m or 2m pole heights, base tray dimensions, 465mm X 990mm
More Information
Intermediate Non Piercing Roof Mount 1m (NF186-1)78.99Each ex.VAT
Intermediate Non Piercing Roof Mount 2m (NF186-2)100.76Each ex.VAT
Corner Non Piercing Roof Mount
Corner Non Piercing Roof Mount
  • Heavy duty corner non-piercing roof mount, hot dipped galvanised steel
  • Ideal for us as a corner mount for bird netting in industrial or commercial applications
  • Available in two pole heights 1m & 2m, requires 4 x 450mm x 450mm paving slabs
  • 4 X holes in pole top, 12mm dia. accepts the hook of M5, M6 & M8 barrel strainers
  • Foot print dimensions, 980mm X 990mm
More Information
Corner Non Piercing Roof Mount 1m (NF187-1)117.02Each ex.VAT
Corner Non Piercing Roof Mount 2m (NF187-2)131.65Each ex.VAT
Non-Piercing Adjustable Ridge Mount 1m and 2m - Galvanised Steel
Non-Piercing Adjustable Ridge Mount 1m and 2m - Galvanised Steel
  • Heavy-duty non-piercing ridge mount for lifting bird netting over ridge lines
  • Ideal for installing netting on pitched roofs incl. tiled, asbestos cement or steel sheet
  • Requires 4 X 450mm X 450mm paving slabs for weight, not supplied
  • Hot dipped galvanised steel construction for long service life outdoors.
  • Easy to assemble with a variable pitch angle from 10 - 60 degrees.
  • 4 X perpendicular 10mm holes in pole top accept M6 barrel strainer hook.
More Information
Non Piercing Ridge Mount 1m (NF190-1)285.88Each ex.VAT
Non Piercing Ridge Mount 2m (NF190-2)293.07Each ex.VAT
Galvanised Steel Cantilever Support Bracket 750mm
Galvanised Steel Cantilever Support Bracket 750mm
  • Cantilever arm to direct netting away from protruding features, eg air vents
  • Can also be used as a bolted roof mount
  • Supplied with anchor bolts for fixing into masonry - Bolts will require a 16 mm drill bit.
  • Drilled 10 mm holes for wire and barrel strainer attachment
  • 750mm Hot dipped galvanised steel
  • Holes on fixing plate are 14 mm diameter, at 90 mm centres
More Information
Galvanised Steel Cantilever Support Bracket 750mm (NF316)18.48Each ex.VAT
Non Piercing Roof Mount Protective Mat 140cm x 140cm
Non Piercing Roof Mount Protective Mat 140cm x 140cm
  • Rubber mat to sit underneath non piercing roof mounts to protect roof surface
  • 140cm x 140cm black rubber mat
  • For use with NF187 & NF186 roof mounts
More Information
Non Piercing Roof Mount Protective Mat 140cm x 140cm (NF310)45.64Each ex.VAT
Netting Capital Bracket
Netting Capital Bracket
  • Used to prevent the net being damaged by any protruding features from a building or structure
  • Enables netting perimeter wire rope to be placed over the edges of parapets and ledges
  • 25 mm X 3mm stainless bracket in 200, 350 & 500mm lengths
  • Netting perimeter wire can run horizontally or vertically through the bracket
  • The bracket contains either two three or four 8mm diameter fixing holes
More Information
Netting Capital Bracket 200mm - Stainless Steel (NF305-200)3.99Each ex.VAT
Netting Capital Bracket 350mm - Stainless Steel (NF305-350)4.99Each ex.VAT
Netting Capital Bracket 500mm - Stainless Steel (NF305-500)5.99Each ex.VAT
Galvanised Steel Cantilever Support Bracket 750mm
Galvanised Steel Cantilever Support Bracket 750mm
  • Cantilever arm to direct netting away from protruding features, eg air vents
  • Can also be used as a bolted roof mount
  • Supplied with anchor bolts for fixing into masonry - Bolts will require a 16 mm drill bit.
  • Drilled 10 mm holes for wire and barrel strainer attachment
  • 750mm Hot dipped galvanised steel
  • Holes on fixing plate are 14 mm diameter, at 90 mm centres
More Information
Galvanised Steel Cantilever Support Bracket 750mm (NF316)18.48Each ex.VAT